<track id="bht5x"><b id="bht5x"><delect id="bht5x"></delect></b></track>
    <delect id="bht5x"><del id="bht5x"></del></delect>
    <span id="bht5x"><ins id="bht5x"><cite id="bht5x"></cite></ins></span>
    
    <th id="bht5x"><del id="bht5x"><b id="bht5x"></b></del></th>

    <span id="bht5x"></span>
       

      焊接鋁塑管產品特點:

      無毒、耐腐蝕、質輕,機械強度高,耐熱性能好,脆化溫度低,使用壽命長。
      管內流體阻力小、不易結垢,流體不受污染,且有效管徑增大。
      100%隔氧,徹底消除滲透。用作通訊線路的屏蔽,可防各種音頻,磁場干擾;且有抗靜電性,適合輸送燃氣及油料。
      管子可任意彎曲并回直。

      Product speciality:

      Nanxin aluminium & plastic complex welded pipes are non-toxic, corrosion resistant, light, mechanic strong and thermally resistant. They have low fragile humidity and long lifetime. Flowing resistance inside the pipe is small, scaling can rarely happen. The fluids can not be contaminated. Effective diameters are big.
      O2 is 100% isolated and infiltration is thoroughly prevented. In case they are used as shielding materials for telecommunication circuit and various audio and magnetic interference can be prevented. They ate anti-static and suitable for gas and fuel transportation. The pipes can be bended or straightened without restriction.
      產品用途:

      廣泛適用于冷熱給水、燃氣、太陽能、采暖、空調、壓縮空氣、氧氣、醫療衛生、食品飲料化工、船舶等工程上流體和氣體的輸送。

      Product application
      They ate widely used in liquid and gas transportation for cold & hot water supply, solo power, heating, AC, compressed air, oxygen, medical and hygiene, food & beverage, chemical industry and shipyard etc.

      鋁塑復合管物理性能

      導熱系數
      0.45W/m.k
      熱膨脹系數
      2.5×10-5m/m.k
      彎曲半徑
      5D
      工作溫度

      -40--+60℃(HDPE)
      -40--+90℃(XLPE)

      液體工作壓力
      1.0PA(pa/管0.5Mpa)
      氣體(氧氣)滲透率
      0

      Physical property of aluminium & plastic complex welded pipe

      Thermal conductivity
      0.45W/m.k
      Thermal expansion conductivity
      2.5×10-5m/m.k
      Bend radius
      5D
      Operation temperature

      -40--+60℃(HDPE)
      -40--+90℃(XLPE)

      Liquid working pressure
      1.0PA(pa/Pipe 0.5Mpa)
      Gas(oxygen)infiltration rate
      0

      鋁塑復合管規格

      規格Φ
      外徑(mm)
      內徑(mm)
      壁厚(mm)
      容量(m3/m) 卷長(mm)
      1014
      14
      10
      2
      7.9×10-5 100,200
      1216
      16
      12
      2
      1.13×10-4 100,200
      1418
      18
      14
      2
      1.54×10-4 100,200
      1620
      20
      16
      2
      2.01×10-4 100,200
      2026/25
      25
      20
      2.5
      3.14×10-4 50,100
      2632
      32
      26
      3
      5.31×10-4 25,50

      Aluminium& plastic complex pipe specification

      SpecificationΦ
      Outer diameter (mm)
      Inner diameter (mm)
      Wall thickness (mm)
      Volume(m3/m) Length(mm)
      1014
      14
      10
      2
      7.9×10-5 100,200
      1216
      16
      12
      2
      1.13×10-4 100,200
      1418
      18
      14
      2
      1.54×10-4 100,200
      1620
      20
      16
      2
      2.01×10-4 100,200
      2026/25
      25
      20
      2.5
      3.14×10-4 50,100
      2632
      32
      26
      3
      5.31×10-4 25,50

      產品技術參數

      項目
      指標
      密度
      0.9g/cm3
      溶融指數(230℃,2.16Kg)
      0.3g/10min
      拉伸強度
      ≥20MPa
      彈性模量(20℃)
      800MPa
      熱膨脹系數
      1.8×10-4/K
      導熱系數
      2.1W/mK
      縱向回縮率
      ≤2%
      沖擊試驗(0℃,2h,15J)
      ≤10%
      液壓試驗
      20℃,環應力16MPa,1h 
      無滲漏
      95℃,環應力3.5MPa,1000h 
      無滲漏

      Product technical parmeter

      Item
      Index
      Density
      0.9g/cm3
      Melting index (230℃,2.16Kg)
      0.3g/10min
      Elongation strength
      ≥20MPa
      Elastic module (20℃)
      800MPa
      Thermal conductivity
      1.8×10-4/K
      Thermal conductivity
      2.1W/mK
      Longitudinal shrinkage
      ≤2%
      Impact test(0℃,2h,15J)
      ≤10%
      Hydraulic test
      20℃,Circular stress 16MPa,1h 
      No leakage
      95℃,Circular stress 3.5MPa,1000h 
      No leakage

       
       
      最好看的最新高清中文字幕,亚洲欧美国产综合在线一区,国产一区日韩二区欧美三区